Our maintenance membership program is back and better than ever. Make the most of your heating and cooling system for the lowest possible price.
Protect your HVAC investment and prolong your system with free annual tune ups, priority service, and more!
Smart Benefits: Free for Smart Members
Annual Tune Ups
We’ll perform two annual maintenance checks to ensure efficiency. Expect a more comfortable home (and energy bill).
No Breakdown Guarantee
We guarantee your system will not break down within 6 months of services. In the rare chance a breakdown does occur within 6 months of services, we will waive all dispatch and diagnostic fees, and apply a $100 credit towards any repair needed.
100% Money Back Guarantee
Our service repair will operate as designed or we’ll remove it and refund you.
$0 Dispatch Fees
Members will never be charged any dispatch fees. Value: $139
Get 15% Off Service Repairs
As a member, enjoy 15% off service repairs and IAQ products. Average annual savings: $130
Credit Towards Investment
100% of your membership fees can be credited towards a replacement. Value: Up to $500
Priority Service
Jump the line whenever your system needs repair. Our certified technicians take care of Smart Members first.
Smart Pricing: Covers One Full System
$19.99/mo or $239.88/yr
Sign Up Today to Receive
What benefits are unlocked if I sign up today?
Waived Diagnostic
Peace of Mind
Why do I need annual tune ups?
Optimize Performance
Our certified technicians ensure your system operates safely and efficiently.
Lower Energy Bills
More efficiency means less energy to maintain a comfortable home.
Prevent Costly Repairs
Tune ups help to catch small issues with your system from turning into big ones.
Maintain System Warranty
Skipping tune ups can void your warranty, depending on the manufacturer.
What’s Included in a Tune Up?
-
Heating Tune Up Checklist
Blower: Measure amperage and voltage
Blower Motor: Inspect for oil leaks
Burner: Brush clean and vacuum
Combustion Prevention: Inspect for combustible material around furnace
Combustion Vents: Surface clean upper and lower vents
Duct System: Test for carbon monoxide
Electrical Wiring: Inspect and tighten as needed
Exhaust System: Test for proper venting
Exterior: Clean furnace exterior
Fan Belt: Inspect and adjust tension (if applicable)
Filter: Clean or replace (customer must supply)
Gas Leak Test: For your safety
Gas Pressure: Measure and adjust for peak efficiency
Heat Exchanger: Visually inspect for wear and cracks
Ignition System: Test for safe and proper operation
Moving Parts: Lubricate as needed, per manufacturer
Supply/Return: Measure temperature difference
Safety & Control Circuits: Test for proper operation
Thermocouple: Clean and test for proper operation
Thermostat: Calibrate and level
-
Cooling Tune Up Checklist
Blower: Inspect for proper operation
Blower Motor: Inspect for proper function
Secondary Motor Control: Inspect and test proper operation
Condenser Coil: Surface rinse clean and remove any debris
Compressor: Monitor amperage and volt draw
Contactors: Inspect and test for proper operation
Ductwork: Inspect for energy loss
Electrical Disconnect: Inspect electrical box
Electrical Wiring: Inspect and tighten as needed
Electrical Wiring: Inspect for any exposed wires
Fan Blade: Inspect for wear and cracks
Filter: Clean or replace (customer must supply)
Indoor Coil: Inspect for build up
Return Air/Size: Confirm proper operation
Refrigerant: Monitor operation pressures
Safety Devices: Inspect for proper operation
Service Valves: Inspect and test for proper operation
Suction Line: Inspect for proper Fittings
Supply/Return: Measure temperature difference
Thermostat: Calibrate and level
Time Delay Relay: Inspect for proper function
-
Plumbing Tune Up Checklist
Dishwasher: Inspect hoses and connections (visible beneath sink)
Drain Flow Test: Check for effective fixture drainage
Emergency Shut Off: Check emergency water shut offs for proper operation
Faucets: Inspect all faucets (tubs, showers, and sinks) for proper operation
Garbage Disposal: Inspect for proper operation
Leak Test (Exterior): Inspect and test outside faucets for leaks
Main Water Pressure Valve: Inspect for pressure reading
Sump Pump: Inspect for proper operation (if applicable)
Toilets: Check for proper operation and overall stability
Washing Machine: Inspect hoses and connections for proper operation
Water: Test for P.H. and Chlorine
Water Heater: Inspect for gas and draft safety
Water Heater: Sediment flush and T&P valve test
Become the smartest home on the block. Protect your HVAC system. Become a Smart Member today.
Ensure your system is protected by filling out the form below or calling (619) 273-5851. Unlock your benefits instantly and start saving today.
Click here to read the applicable terms and conditions
